Hait: LABCONCO


2 111  results were found

Sort Results

Luettelonäkymä
SearchResultCount:"2111"
Tuote #LBCP7812036 on lopetettu: saatat kuitenkin olla kiinnostunut alla luetelluista vaihtoehtoisista tuotteista.
Kuvaus: Mobile concentrator system, CentriVap®, CentriVap® mobile concentrator, glass lid, with heat boost, 12 - 17 mm rotor and solvent trap, without vacuum pump, Mobile, UK-plug, Enimmäiskapasiteetti: 4 l, L×S×K: 358×709×970 mm, Paino: 95 kg
Tuoteluettelon nro: LBCP7812036
UOM: 1 * 1 Items
Toimittaja: LABCONCO

Lopetettu – Ei enää saatavissa
Kuvaus: Säilytyskaapi, Protector Standard Storage Cabinets support Labconco fume hoods Protector®, with filter panel , Ovet: 2, L×S×K: 1220×560×900 mm, 118 kg
Tuoteluettelon nro: LBCP9900000
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)
Tuoteluettelon nro: LBCP5240700
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Blower foot switch, incl. foot pedal and power cord; provides a hands-free means to temporarily shut off power when obtaining sensitive balance readings or manipulating fine powders
Tuoteluettelon nro: 135-1089
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: DOP test kit for HEPA filters, incl. the connections, hoses and test procedure necessary to conduct a HEPA filter test on both the inlet and outlet filter
Tuoteluettelon nro: LBCP5242400
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Installation kit for mechanical or electrical straight pass-through kit, incl. drill bits for installing the mechanical or electrical pass-through
Tuoteluettelon nro: LBCP5240800
UOM: 1 * 1 Each
Toimittaja: LABCONCO


Kuvaus: Bag set for bag-in/bag-out HEPA filter replacement, incl. two bags and two straps necessary for changing and disposing of one inlet or outlet filter
Tuoteluettelon nro: LBCP5241700
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Thimble exhaust connector, Ø 12,7 cm, for connecting the glove box to the FilterMate™ portable exhauster
Tuoteluettelon nro: 135-1090
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Säilytyskaapi, Protector Standard Storage Cabinets support Labconco fume hoods Protector®, with filter panel, Ovet: 2, L×S×K: 760×560×900 mm, 70 kg
Tuoteluettelon nro: LBCP9900200
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Waste port incl. rubber stopper plug, provides a Ø 4,5" (11,4 cm) pass-through port to attach an external waste bag; requires Ø 6,16" drill hole, waste bags and bands (not included)
Tuoteluettelon nro: LBCP5245800
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Recirculation kit, incl. hose, clamps and epoxy-coated steel adapter, allows the built-in blower exhaust to be connected to the inlet HEPA filter, providing total recirculation of air volume useful for dry atmosphere operations
Tuoteluettelon nro: 135-1086
UOM: 1 * 1 Each
Toimittaja: LABCONCO


Kuvaus: Transfer chamber pressure gauge kit, incl. gauge, hose, mounting brackets, fittings and hardware; monitors pressure/vacuum from 0 to -29 inches of mercury (Requires Ø 0,562" drill hole in back of transfer chamber)
Tuoteluettelon nro: LBCP5238100
UOM: 1 * 1 Each
Toimittaja: LABCONCO


Kuvaus: Positive pressure conversion kit, incl. hose, two clamps and harness assembly, creates particulate cleanliness inside the box measured to ISO 14644-1 test method, achieving ISO Class 3 conditions
Tuoteluettelon nro: 135-1087
UOM: 1 * 1 Each
Toimittaja: LABCONCO


Kuvaus: Thimble exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to building exhaust, remote blower or FilterMate™ Portable Exhauster
Tuoteluettelon nro: 135-1084
UOM: 1 * 1 Items
Toimittaja: LABCONCO


Kuvaus: Glassware washing machines, Non-foaming powder detergent, LabSolutions™, large pail,12,5 kg, 400 loads
Tuoteluettelon nro: LBCP4422100
UOM: 1 * 12,5 kg
Toimittaja: LABCONCO

Sertifikaatit


Kuvaus: Glassware washing machines, Utensil holder, stainless steel type 304, 273×104,9×168,4 mm, 1,6 kg
Tuoteluettelon nro: LBCP4542500
UOM: 1 * 1 Items
Toimittaja: LABCONCO


801 - 816 of 2 111